Disconnect Procedure
WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Refer to Battery Disconnect Caution
.
- Turn off all the lamps and accessories.
- Turn the ignition OFF.
- Open the hood.
- Loosen the starter solenoid cable nut (1).
- Remove the starter solenoid cable from the battery negative post.
- Reposition the starter solenoid cable away from the battery.
- Open the negative battery cable post cover (3).
- Loosen the negative battery cable nut (4).
- Remove the negative battery cable (6) from the battery negative post.
- Reposition the negative battery cable away from the battery.