LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 983 (Heating, Ventilation, And Air Conditioning) >> Repair Instructions >> Mode Door Replacement - Upper >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Exploded View Of HVAC Module Assembly
    GM962571Courtesy of GENERAL MOTORS CORP.
  1. Install the lever (7) to the upper mode door/upper HVAC module case (6).
  2. Install the HVAC module assembly halves.
    3. NOTE: Refer to Fastener Notice .
    IMPORTANT: For every heat stake removed ensure that you install a screw.
  3. Install the screws to the HVAC module assembly.

    Tighten:  Tighten the screws to 1.6 N.m (14 lb in).

  4. Install the mode actuator to the HVAC module assembly.
  5. Install the screws to the mode actuator.

    Tighten:  Tighten the screws to 1.6 N.m (14 lb in).

  6. Connect the electrical connector to the mode actuator.
  7. Install the instrument panel. Refer to Instrument Panel Service Positioning (Without SLT) or Instrument Panel Service Positioning (With SLT) .
scientia non olet · About LEMON Manuals