LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 983 (Heating, Ventilation, And Air Conditioning) >> Repair Instructions >> Discharge Hose Replacement (LY2, LMF, L76 and L92) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Recover the refrigerant. Refer to Refrigerant Recovery and Recharging .
  2. Fig 1: Identifying Suction/Discharge Hoses To A/C Compressor
    GM628247Courtesy of GENERAL MOTORS CORP.
  3. Remove the discharge hose mounting bolt (2) from the A/C compressor.
  4. Remove the discharge hose (1) from the A/C compressor.
  5. Remove the upper radiator baffle. Refer to Radiator Air Upper Baffle and Deflector Replacement .
  6. Fig 2: View Of Discharge Hose At Condenser
    GM363062Courtesy of GENERAL MOTORS CORP.
  7. Remove the discharge hose nut from the condenser.
  8. Remove the discharge hose from the condenser.
  9. Disconnect the electrical connector from the A/C recirculation switch.
  10. Remove the discharge hose from the vehicle.
  11. Discard all of the used sealing washers. Cap the system openings.