Installation Procedure
WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Install the right temperature door (4) to the upper HVAC module case (3).
- Install the upper HVAC module case (1) to the lower HVAC module case (2).
- Install the screws to the HVAC module assembly.
Tighten: Tighten the screws to 1.6 N.m (14 lb in).
- Install the instrument panel. Refer to Instrument Panel Service Positioning (Without SLT) or Instrument Panel Service Positioning (With SLT) .
NOTE:
Refer to Fastener Notice
.
IMPORTANT:
For every heat stake removed ensure that you install a screw.