LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 982 (Parking Brake System) >> Repair Instructions >> Parking Brake Intermediate Cable Replacement (JD9, JF3, JF7) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Park Brake Cable, Equalizer Bar And Intermediate Park Brake Cable
    GM1850952Courtesy of GENERAL MOTORS CORP.
  1. Connect the left park brake cable (1) and the right park brake cable (2) to the equalizer bar (3) on the intermediate park brake cable.
  2. Fig 2: Park Brake Cable And Park Brake Cable Connector
    GM1850950Courtesy of GENERAL MOTORS CORP.
  3. Connect the front park brake cable (2) to the intermediate cable connector.
  4. Enable the park brake cable automatic adjuster. Refer to Parking Brake Cable Adjuster Enabling .
  5. Adjust the park brake. Refer to Park Brake Adjustment (Drum Brake)  or Park Brake Adjustment (Disc Brake) .