High Mount Stop Lamp Bulb Replacement (GMC Denali)
WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Remove the high mounted stop lamp cover assembly. Refer to High Mount Stop Lamp Replacement (Regular Cab) or High Mount Stop Lamp Replacement (Extended and Crew Cab) . |
|
| 1 | High Mounted Stop and Cargo Lamp Opening Cover Screw (Qty: 2)
NOTE:
Refer to Fastener Notice
.
Tighten: 2.5 N.m (22 lb in) |
| 2 | High Mounted Stop and Cargo Lamp Opening Cover |
| 3 | Cargo Lamp Bulb (Qty: 2) Tip: Rotate the bulb sockets a quarter turn counter-clockwise to unlock in order to remove the bulbs from the bulb sockets. |
| 4 | Brake Lamp Bulb (Qty: 2) Tip: Rotate the bulb sockets a quarter turn counter-clockwise to unlock in order to remove the bulbs from the bulb sockets. |