LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 980 (Sunroof System) >> Repair Instructions >> Sunroof Window Replacement (Extended Cab) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Sunroof Window Panel Screws
    GM294278Courtesy of GENERAL MOTORS CORP.
  1. Position the sunroof window panel to the sunroof module.

    Ensure that the information logo stencil is towards the rear of the sunroof opening.

  2. NOTE: Refer to Fastener Notice .
  3. Install the sunroof window panel screws to the sunroof window panel.

    Tighten:  Tighten the sunroof window panel screws to 4 N.m (35 lb in).

  4. Adjust the sunroof window panel as necessary. Refer to Sunroof Window Height and Opening Fit Adjustment .
  5. Inspect the sunroof window panel for proper operation.