LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 980 (Sunroof System) >> Repair Instructions >> Sunroof Sunshade Replacement (Extended Cab) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the sunshade to the vehicle from the passengers side.
    2. Fig 1: View Of Sunshade End & Bracket Notch
    GM1825483Courtesy of GENERAL MOTORS CORP.
  2. Insert the end of the sunshade (1) to the driver side bracket (2) notch.
    3. Fig 2: Identifying Sunshade Bracket Notch
    GM1825482Courtesy of GENERAL MOTORS CORP.
  3. Insert the sunshade (1) to the passengers side bracket (2) notch.
    4. Fig 3: Turning Sunshade Cam Counterclockwise
    GM1825478Courtesy of GENERAL MOTORS CORP.
  4. Turn the sunshade cam (2) until it is aligned with the bracket (3) notch.
  5. Install the sunshade.
    6. Fig 4: Sunshade Cam Locking Hole
    GM1825476Courtesy of GENERAL MOTORS CORP.
  6. Remove the suitable tool (1) from the sunshade cam locking hole (2).
  7. Ensure that the sunshade cam (2) is fully seated in the bracket (3) and the sunshade slides smoothly.
  8. Install the sunroof window. Refer to Sunroof Window Replacement (Extended Cab)  or Sunroof Window Replacement (Crew Cab) .
  9. Verify the operation of the sunshade.
scientia non olet · About LEMON Manuals