LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 980 (Sunroof System) >> Repair Instructions >> Sunroof Opening Trim Finish Lace Replacement (Extended Cab) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Sunroof Finishing Lace
    GM1564257Courtesy of GENERAL MOTORS CORP.
  1. Position the end of the sunroof finishing lace at the center rear of the sunroof opening.
    2. Fig 2: Pushing Finishing Lace Onto Track Assembly Flange
    GM1222470Courtesy of GENERAL MOTORS CORP.
  2. Push the finishing lace (2) onto the track assembly flange (1) until fully seated around the sunroof opening.
  3. Pull the finishing lace draw cord toward the sunroof opening. Remove the cord from the periphery of the opening.
  4. Ensure that the finishing lace (2) is properly seated over the outer surface of the headliner (3).
scientia non olet · About LEMON Manuals