Removal Procedure
WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the instrument panel trim. Refer to Instrument Panel Upper Trim Panel with Windshield Defroster Nozzle Grille Replacement (without RPO SLT) or Instrument Panel Upper Trim Panel with Windshield Defroster Nozzle Grille Replacement (with RPO SLT) .
- It is only necessary to lower the headliner. Only do those steps in headliner replacement that will lower the headliner enough to gain access to the part. Refer to Headlining Trim Panel Replacement (Regular Cab) or Headlining Trim Panel Replacement (Crew Cab) or Headlining Trim Panel Replacement (Extended Cab) .
- Disconnect the front sunroof drain hose from the sunroof module front spigot, right or left side, as needed.
- Remove the 1 hose clips securing the drain hose to the windshield pillar, right or left side, as needed.
- Remove the drain hose from the vehicle, right or left side, as needed.
IMPORTANT:
It is only necessary to lower the headliner. Only do those steps in headliner replacement that will lower the headliner enough to gain access.