Installation Procedure
WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Position the sunroof air deflector (2) to the sunroof module (3).
- Install the screws (1) attaching the sunroof air deflector (2) to the sunroof module (3).
Tighten: Tighten the screws to 2 N.m (18 lb in).
- Install the actuators screws (1) and actuators (2) to each side sunroof module.
Tighten: Tighten the screws to 2 N.m (18 lb in).
- Verify that the spring action of the sunroof air deflector is operating.
- Close the sunroof window.
IMPORTANT:
Transfer the air deflector parts to the new air deflector.
NOTE:
Refer to Fastener Notice
.