LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 979 (Interior Trim And Paneling) >> Repair Instructions >> Pressure Relief Valve Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Pressure Relief Valve
GM369712Courtesy of GENERAL MOTORS CORP.

Align the pressure relief valve into the opening of the rear cab.

Press the Pressure Relief Valve into the Cab Back Panel until the locking tabs are fully seated.

scientia non olet · About LEMON Manuals