Center Console End Panel Replacement

WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Center Console End Panel

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Remove the front floor console compartment bezel. Refer to Front Floor Console Compartment Bezel Replacement . Remove the front floor console rear cupholder. Refer to Front Floor Console Cup Holder Replacement .
1	Front Floor Console End Cap Screws (Qty: 4) NOTE: Refer to Fastener Notice . Tighten: 2 N.m (18 lb in)
2	Front Floor Console End Cap Assembly

Callout

Component Name

Preliminary Procedures

Remove the front floor console compartment bezel. Refer to Front Floor Console Compartment Bezel Replacement .
Remove the front floor console rear cupholder. Refer to Front Floor Console Cup Holder Replacement .

Front Floor Console End Cap Screws (Qty: 4)

NOTE: Refer to Fastener Notice .

Tighten: 2 N.m (18 lb in)

Front Floor Console End Cap Assembly