Rear Seat Back Recliner Cover Replacement (Extended Cab with A68)

WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Rear Seat Back Recliner Cover (Extended Cab with A68)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Remove the rear seat. Refer to Rear Seat Replacement (Crew Cab with A68) or Rear Seat Replacement (Extended Cab with A68) or Rear Seat Replacement (Extended Cab with AM7) . Separate the rear split bench seat. Refer to Rear Seat Separation (Extended Cab w/A68) .
1	Rear Seat Recliner Inner Finish Cover Screw NOTE: Refer to Fastener Notice . Tighten: 2 N.m (18 lb ft)
2	Rear Seat Recliner Inner Finish Cover Tip: Pull away from seat to disengage the retainers.
3	Rear Seat Recliner Inner Finish Cover Retainer Clip (Qty: 2)