LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 975 (Seat Hardware, Seat Trim And Upholstery) >> Repair Instructions >> Head Restraint Guide Replacement

Head Restraint Guide Replacement

WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Front Seat Head Restraint Assembly & Components
GM1678363Courtesy of GENERAL MOTORS CORP.
Callout Component Name
1 Front Seat Back Cushion Finish Panel
Tip:  Using a nylon flat-bladed tool, push the tabs in on the side of the panel to release from the seat back to remove.
2 Front Seat Head Restraint Assembly
Tip: 
  1. Depress the button on the inboard head restraint guide to raise the head restraint to the full up position.
  2. Insert a small diameter tool into the hole on the inboard side of the outboard head restraint guide and pull upward to remove.
3 Front Seat Head Restraint Guide (Qty: 2)
Tip:  Squeeze the bottom of the guide together and push up to remove from the seat back.
scientia non olet · About LEMON Manuals