Front Bumper Fascia Trim Cap Replacement (GMC)

WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Front Bumper Fascia Trim Cap (GMC)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	Front Bumper Fascia Trim Cap Bolt (Qty: 4) NOTE: Refer to Fastener Notice . Tighten: 10 N.m (89 lb in)
2	Front Bumper Fascia Trim Cap Tip: Unclip the front bumper fascia trim cap from the radiator grille. Refer to Radiator Grille Replacement (Chevrolet) or Radiator Grille Replacement (GMC) . Pull gently on the sides of the front bumper fascia trim cap outwards to disengage from the front fenders.