Radiator Vent Inlet Hose Replacement (Non-HP2)

WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Radiator Vent Inlet Hose (Non-HP2)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure Drain the cooling system. Refer to Cooling System Draining and Filling (Vac-N-Fill) or Cooling System Draining and Filling (Static Fill) . If necessary, remove the air cleaner resonator duct. Refer to Air Cleaner Resonator Outlet Duct Replacement .
1	Remove Radiator Vent Inlet Hose Clamp (Qty: 2)
2	Remove Radiator Vent Inlet Hose Support Clip (Qty: 2)
3	Radiator Vent Inlet Hose