Removal Procedure
WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Loosen the air cleaner outlet duct clamps from the throttle body.
- Loosen the air cleaner outlet duct clamps from the mass airflow sensor.
- Remove the air cleaner outlet duct.
- Remove the A/C line retainer from the fan shroud.
- Remove the engine harness clip from the powertrain control module (PCM) cover.
- Remove the transmission control module (TCM) cover bolts.
- Remove TCM cover from the fan shroud.
- Loosen the TCM electrical connector bolts.
- Disconnect the TCM electrical connectors (1).
- Remove the TCM and cover.
- Remove the fan shroud retainers (1).
- Remove the fan shroud bolts (2).
- Remove the upper fan shroud.