3-5 Reverse Clutch Backing Plate Rivet Damage Notice
WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
DO NOT install special tools, J tools, onto the gear thrust plate rivets of the 3rd, 5th, and reverse clutch backing plate assembly. The special tools could damage the gear thrust plate rivets.