Hood Front Molding Replacement (GMC Denali)

WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Hood Front Molding (GMC Denali)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Open the hood in order to access and remove the front hood molding.
1	Hood Front Molding Assembly Tip: Release the integral retainers from the hood. Upon installation, align the left hand center retainer first into the hood as indicated. Gently secure the remaining retainers working from left to right across the entire hood front molding.