Drive Belt Tensioner and Generator Mounting Bracket Installation

WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Generator Mounting Bracket

Courtesy of GENERAL MOTORS CORP.

Install the drive belt tensioner and generator mounting bracket.

NOTE: Refer to Fastener Notice .

Install the drive belt tensioner and generator mounting bracket bolts.
Tighten: Tighten the drive belt tensioner and generator mounting bracket bolts to 50 N.m (37 lb ft).

Fig 2: View Of Drive Belt Tensioner

Courtesy of GENERAL MOTORS CORP.

Install the drive belt tensioner.
Install the drive belt tensioner bolt.
Tighten: Tighten the drive belt tensioner bolt to 50 N.m (37 lb ft).

Fig 3: View Of Electrical Harness Clip Bolts

Courtesy of GENERAL MOTORS CORP.

Install the electrical harness clip bolts.
Tighten: Tighten the electrical harness clip bolts to 10 N.m (89 lb in).