Section 963 (Engine Mechanical - 4.8L, 5.3L, 6.0L And 6.2L (5 Of 5))
WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Off-Vehicle Repair Instructions (3 Of 3)
- Engine Front Cover Installation (RPO LY2/LH6/LMG/LY5/LC9)
- Engine Front Cover Installation (RPO LY6/L76/L92)
- Crankshaft Front Oil Seal Installation (RPO LY2/LH6/LMG/LY5/LC9)
- Crankshaft Front Oil Seal Installation (RPO LY6/L76/L92)
- Oil Pan Installation
- Oil Filter Installation
- Valve Lifter Installation (RPO LY2/LY6/L92)
- Valve Lifter Installation (RPO LH6/LMG/LY5/LC9/L76)
- Cylinder Head Installation - Left Side
- Cylinder Head Installation - Right Side
- Valve Rocker Arm and Push Rod Installation (RPO LY2/LH6/LMG/LY5/LC9)
- Valve Rocker Arm and Push Rod Installation (RPO LY6/L76)
- Valve Rocker Arm and Push Rod Installation (RPO L92)
- Valve Rocker Arm Cover Installation - Left Side
- Valve Rocker Arm Cover Installation - Right Side
- Engine Block Valley Cover Installation
- Valve Lifter Oil Filter Installation
- Valve Lifter Oil Manifold Installation
- Engine Coolant Air Bleed Pipe and Hole Cover Installation (RPO LY2/LY6/L92)
- Engine Coolant Air Bleed Pipe and Hole Cover Installation (RPO LH6/LMG/LY5/LC9/L76)
- Intake Manifold Installation (RPO LY2/LY6/L92)
- Intake Manifold Installation (RPO LH6/LMG/LY5/LC9/L76)
- Throttle Body Installation
- Water Pump Installation (RPO LY2/LH6/LMG/LY5/LC9)
- Water Pump Installation (RPO LY6/L76/L92)
- Exhaust Manifold Installation - Left Side
- Exhaust Manifold Installation - Right Side
- Oil Level Indicator and Tube Installation
- Automatic Transmission Flex Plate Installation
- Crankshaft Balancer Installation
- Engine Prelubing