LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 962 (Engine Mechanical - 6.6L (3 Of 5)) >> Off-Vehicle Repair Instructions (2 Of 4) >> Exhaust Gas Recirculation and Cooler Removal

Exhaust Gas Recirculation and Cooler Removal

WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Intake Pipe
    GM1650655Courtesy of GENERAL MOTORS CORP.
  1. Remove the intake pipe to air inlet tube bolts.
  2. Remove the intake pipe.
  3. Remove the intake heater.
    4. Fig 2: View Of Air Inlet Tube Bolt And Nut
    GM1650657Courtesy of GENERAL MOTORS CORP.
  4. Remove the air inlet tube to intake manifold tube bolt and nut.
    5. Fig 3: View Of Air Inlet Tube
    GM1650661Courtesy of GENERAL MOTORS CORP.
  5. Remove the air inlet tube nuts.
  6. Remove the air inlet tube.
    7. Fig 4: View Of EGR Cooler
    GM1650663Courtesy of GENERAL MOTORS CORP.
  7. Remove the rear EGR cooler bolts.
    8. Fig 5: View Of EGR Mount Bolt
    GM1335571Courtesy of GENERAL MOTORS CORP.
  8. Remove the EGR mount bolt.
    9. Fig 6: View Of EGR & Cooler
    GM1335573Courtesy of GENERAL MOTORS CORP.
  9. Remove the EGR and cooler.
    10. Fig 7: Identifying EGR Cooler Bracket
    GM1650666Courtesy of GENERAL MOTORS CORP.
  10. Remove the EGR cooler bracket bolts.
  11. Remove the EGR cooler bracket.
    12. Fig 8: View Of Intake Manifold Tube
    GM1335575Courtesy of GENERAL MOTORS CORP.
  12. Remove the intake manifold tube.
scientia non olet · About LEMON Manuals