Tools Required

WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.

J 37228 Seal Cutter. See Special Tools .

Fig 1: View Of CKP Sensor & Bolt

Courtesy of GENERAL MOTORS CORP.

Remove the crankshaft position sensor bolt.
Remove the crankshaft position sensor.

Fig 2: View Of Engine Front Cover

Courtesy of GENERAL MOTORS CORP.

Remove the engine front cover bolts.
Separate the engine front cover from the cylinder block using J 37228 . See Special Tools .
Remove the engine front cover.