LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 958 (Engine Mechanical - 6.6L (2 Of 5)) >> On-Vehicle Repair Instructions >> Oil Level Indicator and Tube Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Oil Level Indicator Tube & Bolt
    GM1873233Courtesy of GENERAL MOTORS CORP.
  1. Remove the oil level indicator.
  2. Remove the exhaust manifold. Refer to Exhaust Manifold Replacement - Right Side (4.3L) or Exhaust Manifold Replacement - Right Side (4.8L, 5.3L, 6.0L, and 6.2L) or Exhaust Manifold Replacement - Right Side (6.6L) .
  3. Remove the starter motor. Refer to Starter Motor Replacement (4.3L) or Starter Motor Replacement (4.8L, 5.3L, 6.0L, and 6.2L) or Starter Motor Replacement (6.6L) .
  4. Remove the oil level indicator tube bolt at the indicator tube bracket.
  5. Remove the oil level indicator tube and O-ring seals.
  6. Remove and discard the O-ring seals.
scientia non olet · About LEMON Manuals