LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 958 (Engine Mechanical - 6.6L (2 Of 5)) >> On-Vehicle Repair Instructions >> Oil Filler Tube Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Upper Oil Fill Tube Bolt
    GM1873290Courtesy of GENERAL MOTORS CORP.
  1. Remove the fan and clutch assembly. Refer to Cooling Fan and Shroud Replacement .
  2. Remove the drive belt. Refer to Drive Belt Replacement .
  3. Remove the upper oil fill tube bolt (1).
    4. Fig 2: View Of Oil Filler Tube Bracket Bolts
    GM1873245Courtesy of GENERAL MOTORS CORP.
  4. Remove the oil filler tube bracket bolts.
  5. Remove the oil fill tube bracket.
    6. Fig 3: View Of Lower Oil Fill Tube Bolt
    GM1873325Courtesy of GENERAL MOTORS CORP.
  6. Remove the lower oil fill tube bolt (1).
    7. Fig 4: View Of Oil Filler Tube
    GM1335401Courtesy of GENERAL MOTORS CORP.
  7. Remove the oil fill tube.
  8. Remove and discard the oil fill tube O-ring seal.
scientia non olet · About LEMON Manuals