Stabilizer Shaft Link Replacement (3500)

WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Stabilizer Shaft Link

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle . Remove the rear tire and wheel. Refer to Tire and Wheel Removal and Installation .
1	Rear Stabilizer Shaft Link Bolt
2	Rear Stabilizer Shaft Nut (Qty: 2) NOTE: Refer to Fastener Notice . Tighten: 95 N.m (70 lb ft)
3	Rear Stabilizer Shaft Link