Shock Absorber Replacement (2500, 3500)
WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Shock Absorber Replacement (2500, 3500)
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Raise the vehicle on a hoist. Refer to Lifting and Jacking the Vehicle . |
|
| 1 | Rear Shock Absorber Bolt (Qty: 2) Procedure: Support the rear drive axle with a suitable jack stand. |
| 2 | Rear Shock Absorber Nut (Qty: 2)
NOTE:
Refer to Fastener Notice
.
Tighten: 95 N.m (70 lb ft) |
| 3 | Rear Shock Absorber |