LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 954 (Steering Linkage) >> Repair Instructions >> Steering Linkage Inner Tie Rod Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the engine shield, if equipped. Refer to Engine Shield Replacement .
  2. Remove the steering linkage outer tie rod. Refer to Steering Linkage Outer Tie Rod Replacement .
    3. Fig 1: Inner Tie Rods Ends
    GM865341Courtesy of GENERAL MOTORS CORP.
  3. Remove the steering linkage inner tie rod (1) from the relay rod using wrench J 34028  (2). See Special Tools .
scientia non olet · About LEMON Manuals