LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 953 (Transfer Case - NVG 261-NP2) >> Repair Instructions - On Vehicle >> Input Shaft Seal Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Transfer Case Input Shaft Seal
    GM678215Courtesy of GENERAL MOTORS CORP.
  1. Remove the transfer case. Refer to Transfer Case Assembly Replacement .
  2. using a flat-tipped screwdriver, remove the input shaft seal.
scientia non olet · About LEMON Manuals