Tools Required

WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.

J 3049-A Valve Lifter Remover. See Special Tools .

Fig 1: View Of Valve Lifter Pushrod Guides

Courtesy of GENERAL MOTORS CORP.

IMPORTANT: Place the components in a rack so that the components can be reinstalled to their original location.

Remove the bolts and valve lifter pushrod guide.

Fig 2: View Of Valve Lifters

Courtesy of GENERAL MOTORS CORP.

IMPORTANT: Place the valve lifters in the rack in the upright position in order to maintain the oil inside the valve lifters.

Remove the valve lifters.

Fig 3: Using J 3049-A To Remove The Stuck Valve Lifters

Courtesy of GENERAL MOTORS CORP.

IMPORTANT: Some valve lifters may be stuck in the valve lifter bores because of gum or varnish deposits and may require the use ofJ 3049-A for removal. See Special Tools .

Use the J 3049-A in order to remove the stuck valve lifters. See Special Tools .