LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 946 (Front Drive Axle) >> Repair Instructions >> Vent Hose Replacement (8.25 Inch Axle) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Locating Vent Hose & Components
    GM1689174Courtesy of GENERAL MOTORS CORP.
  1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the engine shield, if equipped. Refer to Engine Shield Replacement .
  3. Remove the vent hose the retainers from the frame.
  4. Remove the vent hose from the connector.
  5. Lower the vehicle.
    6. Fig 2: View Of Vent Hose
    GM1690649Courtesy of GENERAL MOTORS CORP.
  6. Remove the vent hose from the inner fender.
scientia non olet · About LEMON Manuals