Installation Procedure

WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Vent Hose

Courtesy of GENERAL MOTORS CORP.

Install the vent hose to the inner fender.
Raise the vehicle.

Fig 2: Locating Vent Hose & Components

Courtesy of GENERAL MOTORS CORP.

Install the vent hose retainers to the frame.
Install the vent hose to the connector.
Install the engine shield, if equipped. Refer to Engine Shield Replacement .
Lower the vehicle.