LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 946 (Front Drive Axle) >> Repair Instructions >> Front Drive Axle Clutch Fork Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Inner Axle Shaft Housing & Clutch Fork Assembly - Front Drive Axle
    GM890589Courtesy of GENERAL MOTORS CORP.
  1. Remove the inner axle shaft and housing assembly. Refer to Front Drive Axle Inner Shaft and Inner Shaft Housing Replacement (8.25 F4WD Axle)  or Front Drive Axle Inner Shaft and Inner Shaft Housing Replacement (8.25 S4WD and 9.25 Axles) .
  2. Remove the clutch fork assembly (2) from the inner axle shaft housing (1).
  3. Remove the clutch fork inner spring from the differential carrier case assembly, if necessary.