Differential Carrier Assembly Disassemble (9.25 Inch Axle): Notes

WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Tools Required

J 22912-B Split-Plate Bearing Puller. See Special Tools .
J 2619-01 Slide Hammer
J 29369-2 Bushing and Bearing Remover (2-3 in). See Special Tools .
J 33791 Carrier Bushing Remover/Installer. See Special Tools .
J 34011 Pilot Bearing Remover. See Special Tools .
J 36599-A Side Bearing Nut Wrench. See Special Tools .
J 36615 Side Bearing Nut Wrench. See Special Tools .
J 36616 Axle Mount Bushing Remover/Installer. See Special Tools .
J 45754 Pinion Bearing Race Remover/Installer - 9. See Special Tools .25 inch Axle
J 45765 Pinion Remover. See Special Tools .
J 8614-01 Flange and Pulley Holding Tool. See Special Tools .