Diagnostic Aids
WARNING: This page is about a different car, the 2007 GMC Sierra, 2007 GMC Cab & Chassis Sierra, 2007 Chevrolet Silverado, and 2007 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- A slight to moderate resistance in either signal or low reference circuit, can widen the spread between the two EGT sensors, and cause this DTC to set.
- An EGT sensor that is skewed lower at various ambient temperatures, due to more resistance than is normal, can widen the spread between the two sensors and cause this DTC to set. Measure and record the resistance of both EGT sensors 1 and 2 at ambient temperature. Compare those measurements to the Temperature Versus Resistance (Fuel Temperature Sensor) or Temperature Versus Resistance (EGT Sensors) or Temperature Versus Resistance (IAT Sensor 1) or Temperature Versus Resistance (ECT Sensors) or Temperature Versus Resistance (IAT Sensor 2) .