Circuit/System Testing
WARNING: This page is about a different car, the 2007 GMC Sierra, 2007 GMC Cab & Chassis Sierra, 2007 Chevrolet Silverado, and 2007 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition ON, vary the engine speed with the accelerator pedal. Verify that P0191 does not set as current.
- If the DTC sets as current, test the fuel line pressure sensor signal circuit for a high resistance. If the circuit tests normal, replace the fuel line pressure sensor.
- If the DTC does not reset in the FPCM, the system is OK. Do not replace the FPCM.