LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 924 (Engine Controls And Fuel - 6.6L (LMM) - Diagnosis & Troubleshooting) >> Malfunction Indicator Lamp (MIL) Diagnosis >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2007 GMC Sierra, 2007 GMC Cab & Chassis Sierra, 2007 Chevrolet Silverado, and 2007 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON, command the MIL ON and OFF with a scan tool. The MIL should turn ON and OFF with each command.
  2. Engine running, observe the DTC information with a scan tool. DTC P0650 should not set.
  3. Operate the vehicle within the Conditions for Running the DTC. You may also operate the vehicle within the conditions that you observed from the Freeze Frame Records data.