Installation Procedure

WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Exhaust Manifold Heat Shield & Bolts

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice .

Position the exhaust manifold heat shield to the exhaust manifold and install the heat shield bolts.
Tighten: Tighten the bolts to 9 N.m (80 lb in).
Install the spark plug wires. Refer to Spark Plug Replacement .