Installation Procedure

WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Left Exhaust Heat Shield & Nuts

Courtesy of GENERAL MOTORS CORP.

If installing the heat shield (3), install the shield thru the passenger side wheelwell.
Install the exhaust heat shield (1, 3) to the dash panel studs.
NOTE: Refer to Fastener Notice .
Install the exhaust heat shield nuts.
Tighten: Tighten the nuts to 9 N.m (80 lb in).
Lower the vehicle.