LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 920 (Automatic Transmission - ALLISON - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis) >> Off-Vehicle Repair Instructions >> 1-2-3-4-5-6 Clutch Piston Housing Assembly Removal

1-2-3-4-5-6 Clutch Piston Housing Assembly Removal

WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying 1-2-3-4, 4-5-6 Clutch Assembly
    GM1216915Courtesy of GENERAL MOTORS CORP.
  1. Lift and remove the 1-2-3-4, 4-5-6 clutch piston assembly (1).
    2. Fig 2: Locating Thrust Bearing Assembly
    GM1217467Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: The thrust bearing assembly may stick to the 1-2-3-4, 4-5-6 clutch piston assembly or the input carrier assembly.
  2. Remove thrust bearing assembly (1) from the 1-2-3-4, 4-5-6 clutch piston assembly or the input carrier assembly.
scientia non olet · About LEMON Manuals