LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 916 (Automatic Transmission - 6L50/6L80/6L90 - Introduction (2 Of 2)) >> Specifications >> Clutch Backing Plate Retaining Ring Specifications (6L90)

Clutch Backing Plate Retaining Ring Specifications (6L90)

WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
3-5 Reverse Clutch

Clutch Pack Travel Specification - 1.50-2.08 mm (0.059-0.082 in)
Retaining Ring Thickness O.D. Color
Metric English
IMPORTANT: After measuring clutch pack travel, determine if the measurement is within the specification. If the measurement is not within the specification, measure the thickness of the existing retaining ring, and then choose a thicker or thinner retaining ring that will bring the measurement within specification.
1.61-1.71 mm 0.063-0.067 in Gray
1.88-1.98 mm 0.074-0.078 in Light Green
2.15-2.25 mm 0.085-0.089 in Yellow
2.42-2.52 mm 0.095-0.099 in None
2.69-2.79 mm 0.106-0.110 in Purple
1-2-3-4 Clutch

Clutch Pack Travel Specification - 1.79-2.25 mm (0.070-0.089 in)
Retaining Ring Thickness O.D. Color
Metric English
IMPORTANT: After measuring clutch pack travel, determine if the measurement is within the specification. If the measurement is not within the specification, measure the thickness of the existing retaining ring, and then choose a thicker or thinner retaining ring that will bring the measurement within specification.
2.42-2.52 mm 0.095-0.099 in None
2.69-2.79 mm 0.106-0.110 in Purple
2.96-3.06 mm 0.117-0.120 in Light Blue
3.23-3.33 mm 0.127-0.131 in Orange
3.50-3.60 mm 0.138-0.142 in White
4-5-6 Clutch

Clutch Pack Travel Specification - 1.18-1.79 mm (0.059-0.082 in)
Retaining Ring Thickness O.D. Color
Metric English
IMPORTANT: After measuring clutch pack travel, determine if the measurement is within the specification. If the measurement is not within the specification, measure the thickness of the existing retaining ring, and then choose a thicker or thinner retaining ring that will bring the measurement within specification.
1.60-1.70 mm 0.063-0.067 in Yellow
2.02-2.12 mm 0.080-0.083 in None
2.44-2.54 mm 0.096-0.100 in Purple