Transfer Case Adapter Replacement

WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Transfer Case Adapter, Seal & Bolt

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Remove the transfer case. Refer to Transfer Case Assembly Replacement . Remove the transmission mount. Refer to Transmission Mount Replacement (2WD) or Transmission Mount Replacement (4WD) for the 4L60-E/4L65-E/4L70-E transmission, or Transmission Mount Replacement (2WD) or Transmission Mount Replacement (4WD) for the 6L50/6L80/6L90 transmission.
1	Transfer Case Adapter Bolt NOTE: Refer to Fastener Notice . Tighten: 50 N.m (37 lb ft)
2	Transfer Case Adapter
3	Transfer Case Adapter Seal Tip: Always use a new seal for the adapter. Do not use any type of sealant or adhesive in place of or with the seal.