LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 913 (Transfer Case - Mp 1625/1626-NQF) >> Diagnostic Information and Procedures >> Transfer Case High/Low Clutch Reset >> Using a Scan Tool

Using a Scan Tool

WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Key ON, engine OFF.
  2. Go to the Special Functions heading in the scan tool.
  3. Select Clutch Reset Procedure (Motor Learn Procedure/ATC Motor Learn).
  4. When the Clutch Reset Procedure is initiated you should hear the motor engage, indicating a successful learn procedure.
scientia non olet · About LEMON Manuals