LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 908 (Engine Controls And Fuel - 6.6L (LMM) - Introduction (2 Of 2)) >> Repair Instructions >> Charge Air Cooler Outlet Pipe Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 GMC Sierra, 2007 GMC Cab & Chassis Sierra, 2007 Chevrolet Silverado, and 2007 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Charge Air Cooler Outlet Pipe & Quick Connect Fitting Clip
    GM1873426Courtesy of GENERAL MOTORS CORP.
  1. Install NEW quick connect fitting clips to both ends of the charge air cooler outlet pipe.
  2. Fig 2: View Of Charge Air Cooler Outlet Pipe & Quick Connect Fitting Clip
    GM1873427Courtesy of GENERAL MOTORS CORP.
  3. Working through the wheelhouse, install the charge air cooler outlet pipe onto the charge air cooler.
  4. Install the wheelhouse panel. Refer to Front Wheelhouse Liner Replacement - Right Side (Chevrolet) or Front Wheelhouse Liner Replacement - Right Side (GMC) .
  5. Fig 3: View Of Charge Air Cooler Outlet Pipe At Intake Air Valve
    GM1873428Courtesy of GENERAL MOTORS CORP.
  6. Install the charge air cooler outlet pipe onto the intake air valve.
  7. Install the air cleaner assembly. Refer to Air Cleaner Assembly Replacement .