Clunk Noise When Accelerating During Turns
WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Clunk Noise When Accelerating During Turns
| Step | Action | Yes | No |
|---|---|---|---|
| 1 | Check for worn or damaged outer wheel drive shaft joints and/or seals. Are the outer wheel drive shaft joints/seals worn? |
Go to Step 2 | System OK |
| 2 | Check for proper clearance between the wheel drive shaft and other components. Correct as necessary. Is the repair complete? |
System OK | Go to Step 3 |
| 3 | Replace the outer CV joints/seals. Refer to Wheel Drive Shaft Outer Joint and Boot Replacement . Is the repair complete? |
System OK | - |