LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 901 (Front Suspension System) >> Repair Instructions >> Wheel Stud Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the tire and wheel. Refer to Tire and Wheel Removal and Installation .
  3. Remove the brake rotor. Refer to Front Brake Rotor Replacement (JD9, JF3, JF7) or Front Brake Rotor Replacement (JH6, JH7) .
    4. Fig 1: Removing Wheel Stud From Axle Flange
    GM649304Courtesy of GENERAL MOTORS CORP.
  4. Use the J 43631  to press the stud from the wheel bearing/hub. See Special Tools .
scientia non olet · About LEMON Manuals