LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 901 (Front Suspension System) >> Repair Instructions >> Torsion Bars Bushing Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    IMPORTANT: This procedure requires the removal of both torsion bars.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the torsion bars. Refer to Torsion Bar and Support Assembly Replacement (Bushing Style) .
  3. Remove the bushing from the bracket utilizing a bushing driver or the equivalent.
scientia non olet · About LEMON Manuals