LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 901 (Front Suspension System) >> Repair Instructions >> Torsion Bars Bushing Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the bushing to the bracket utilizing a bushing driver or the equivalent.
  2. Install the torsion bars. Refer to Torsion Bar and Support Assembly Replacement (Bushing Style) .
  3. Remove the safety stands.
  4. Lower the vehicle.
  5. Measure the Z height. Refer to Trim Height Inspection .
  6. Turn the adjustment bolt clockwise to increase the Z height and counterclockwise to lower the Z height.
scientia non olet · About LEMON Manuals