Stabilizer Shaft Link Replacement (1500)

WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Stabilizer Shaft Link (1500)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the tire and wheel. Refer to Tire and Wheel Removal and Installation .
1	Stabilizer Shaft Link Nut NOTE: Refer to Fastener Notice . Procedure Remove all traces of the original adhesive patch. Apply Threadlocker GM P/N 12345382 (Canadian P/N 10953489) BLUE LOCTITE # 242 on the threads of the bolts. Tighten: 23 N.m (17 lb ft)
2	Stabilizer Shaft Link Bolt
3	Stabilizer Shaft Link Washer (Qty: 2)
4	Stabilizer Shaft Link Insulator (Qty: 4)
5	Stabilizer Shaft Link Spacer